Premium Cleaning & Sealing for Sydney Homes

Premium Cleaning & Sealing for Sydney Homes

From heritage sandstone house facades to travertine pool surrounds, to indoor tiles and natural stones — Sydney homeowners trust Cityshine with their most valuable surfaces. Instant quote from your photos — no site visit needed.

Quote my home (60 seconds)Call 1300 024 897
  • In Sydney since 2003
  • 1,000+ Sydney homes
  • Up to 15-year warranty on premium sealers
  • Australian-owned

The right method for every surface

High pressure on the wrong surface does permanent damage — etched sandstone, blown-out mortar, scarred pavers. That's why every Cityshine job starts by matching the method to the material. Working since 2003 on Sydney's most demanding surfaces taught us what each one can take.

  • High-pressure clean

    High-pressure clean

    Hard-wearing surfaces that can take it — driveways, concrete and brick paving restored to like-new.

  • Soft wash

    Soft wash

    Gentle, low-pressure cleaning for sandstone, render and painted surfaces — never blasted.

  • Chemical treatment

    Chemical treatment

    Specialised treatments where water alone won't do — oil, rust, graffiti and efflorescence.

What we work on

Cityshine specialises in cleaning and sealing premium hard surfaces for Sydney homes — internal and external areas, new builds and existing surfaces.

Choosing your sealer

Sealing is what makes a clean last. We use premium PCA sealers matched to your surface and the finish you want — and we'll recommend the right one at your free inspection, and explain why.

  • Penetrating sealers

    Penetrating sealers

    Soak into the surface and protect invisibly — no film, no sheen, keeps the natural look. Ideal for natural stone where you want it to look untouched.

  • Topical sealer

    Topical sealer

    A protective film that sits on top of the surface — tougher wear protection with a satin to wet-look finish. Ideal for concrete driveways and garage floors.

  • Water-based sealers

    Water-based sealers

    Non-odour, low-VOC chemistry that's safer around homes, pets and pools — quick-drying with a natural finish. Ideal for indoor tiles and stones.

How it works

  1. Free site inspection

    We measure and assess your surfaces in person, or from the photos you send.

  2. Itemised quote within 24 hours

    Materials, method and timing — all in writing.

  3. Protection first

    Gardens covered, runoff controlled and surrounds masked before any work starts.

  4. Clean and seal

    The right method and premium PCA products matched to your surface.

  5. Final walkthrough

    You check every metre, and we leave an aftercare sheet.

Featured residential projects

A few of the Sydney homes we've recently cleaned, sealed and protected.

View all 107 projects →

Why choose Cityshine?

  • Free site inspections
  • Fully insured
  • Premium sealers
  • Written quotations
  • Up to 15-year warranty
  • Trusted by Sydney councils since 2003
Quote my home

Common questions

How soon can I walk or park on a sealed surface?
Foot traffic is usually fine within 2–4 hours. Keep vehicles off driveways for 24–48 hours depending on the sealer and weather — we'll give you exact times on the day.
How often should I reseal?
Most driveways and outdoor areas: every 2–3 years. High-traffic or exposed areas may need it sooner; covered areas last longer. A quick photo is enough for us to tell you where yours is at.
Wet-look or natural finish?
Personal taste — wet-look deepens colour and adds sheen; penetrating sealers keep the surface looking untouched. See “Choosing your sealer” above, or ask at your inspection.
Will pressure cleaning damage my pavers or stone?
Not when the method matches the material — that's the point of our inspection. Sandstone, render and older mortar are cleaned with low-pressure methods, never blasted.
Is it safe for pets and plants?
Yes — gardens are covered before treatment, runoff is contained, and we use surface-appropriate products. Keep pets off treated areas until dry (we'll tell you when).
What affects the price?
Area size, surface type, how soiled it is, access, and the sealer you choose. That's why our quote is itemised — you see exactly what you're paying for.
Do I need to be home?
Not usually — clear access and a phone number is enough. We photograph before and after every job.
Do you do small jobs?
Yes — from a single path to a full estate. Minimum charges apply; the quiz will give you a feel quickly.
Which areas do you service?
We're based in Moorebank and service all of metropolitan Sydney, plus surrounding cities and regional areas — get in touch about your location.
Can you fix a previous company's bad sealing job?
Usually, yes — stripping and resealing is one of our specialities. Send photos through the quote form.

Quote my home in 60 seconds

Instant quote from your photos — no site visit needed. A Cityshine Project Manager will respond within 24 hours.

Quote my home in 60 seconds