Indoor pool-surround anti-slip sealing, Milsons Point
View the project and photographs →
Anti-Slip Surface Treatment Sydney
Improve grip where paving, stone, concrete or tile becomes slippery under wet use. We assess the surface, contamination, existing coatings and intended use before recommending a compatible anti-slip treatment.
Pool paver and coping cleaning, sealing and anti-slip treatment, Arcadia
In Sydney since 2003Fully insuredResidential and commercialWe proudly use PCA sealers, made in Australia for Australian conditions.
Start with the cause, not a blanket “non-slip” promise
A surface can feel slippery because of algae, oils, cleaning residue, a smooth finish, a worn coating, water exposure or several factors together. Adding texture without understanding the surface can create a finish that is unsuitable, difficult to clean or incompatible with the existing treatment.
We assess the area dry and, where relevant, under expected wet-use conditions. The treatment must suit the surface type, exposure, traffic and desired appearance. Drainage, damaged paving and maintenance problems may also need attention; a coating is not a substitute for repairing those issues.
No treated surface is risk-free in every condition. Our role is to recommend and apply an appropriate system, explain its limitations and give you clear cleaning and maintenance guidance.
Anti-slip options depend on the surface and use
Anti-slip additive with a compatible sealer
For suitable paving or concrete, an anti-slip additive may be incorporated into a compatible sealing system. The surface, existing coating and required finish determine whether this approach is appropriate.
Dedicated treatment or coating
Tiles, stairs, ramps and high-use commercial areas may require a specified treatment or coating rather than an additive alone. Trial areas and project requirements can guide the system.
Cleaning and maintenance correction
Biological growth, grease, residue and unsuitable cleaning methods can reduce grip. Sometimes the first control is proper cleaning and a maintenance change, with treatment considered after assessment.
Service area
Pool surrounds and wet entertaining areas
Pool surrounds face regular water, bare feet and cleaning chemicals. We assess the tile, stone or paving, existing finish and wet-use conditions before recommending a compatible treatment. The pool-surround cleaning and sealing page covers the wider preparation and sealing service.
Service area
Bathrooms, change rooms and wet-area floors
Bathrooms, showers, change rooms and end-of-trip facilities combine smooth tile, regular water and barefoot traffic. We assess the tile, grout, contamination and cleaning regime before recommending a treatment suited to the wet-area use. The selected system must also remain practical to clean and maintain.
Service area
Patios, courtyards, paths and steps
Outdoor paving and steps collect moisture, leaf litter and biological growth. The method must suit the paving face, joints and expected traffic. Cleaning and ongoing maintenance remain important after treatment.
Service area
Commercial entries, ramps and walkways
Commercial and public areas may have a defined slip-resistance specification, staged access requirements or a need for independent testing. We confirm the project requirement and treatment scope before work; we do not describe a surface as compliant without the evidence required for that project.
P-ratings and testing are project-specific
For stairs, ramps and some commercial or public projects, the required slip-resistance classification depends on the application and whether the surface is expected to be wet or dry. The National Construction Code references testing in accordance with AS 4586 for specified pedestrian surfaces.
A product name or anti-slip additive does not by itself prove the installed surface has achieved a particular rating. Where a P-rating or compliance outcome is required, the project must define the target, preparation, application and testing pathway. We keep that distinct from ordinary residential requests to improve grip.
Anti-slip projects across Sydney
End-of-trip facility anti-slip treatment, Rosebery
View the project and photographs →
Public paving anti-slip treatment, Randwick
View the project and photographs →
Concrete path and ramp anti-slip treatment, Meadowbank
View the project and photographs →
Granite paving anti-slip treatment, St Peters
View the project and photographs →
External paver anti-slip treatment, Zetland
View the project and photographs →
From slippery surface to a maintained treatment
-
Assess the risk and surface
Review where and when the area is slippery, the surface type, drainage, contamination, coatings and expected users.
-
Confirm the requirement
For residential work, agree the intended improvement and finish. For specified projects, confirm the target classification and evidence pathway.
-
Trial where needed
Test compatibility, appearance and texture on a representative area before wider treatment where the surface or system requires it.
-
Prepare and apply
Protect adjoining areas, complete the agreed cleaning or coating preparation, then apply the selected treatment in suitable conditions.
-
Handover and maintain
Provide curing, access and cleaning guidance. Commercial testing or documentation is completed only where included in the agreed scope.
Premium Coatings Australia
Australian-made systems for Australian conditions
We proudly use PCA sealers, made in Australia for Australian conditions.
Where an additive-and-sealer system is suitable, we match the preparation, product and texture to the surface and its use. Other sites may need a different specified treatment. Product selection follows assessment; it is not one system for every slippery surface.
Grip also depends on cleaning, drainage and maintenance
Keep treated areas free of algae, grease, leaf litter and cleaning-product build-up. Follow the care method supplied for the surface and treatment. Harsh or incompatible chemicals can change the finish and its performance.
Monitor high-traffic and frequently wet areas. If grip, texture or appearance changes, arrange an assessment rather than applying an unknown product over the existing system.
Anti-slip treatment questions
Can you make any surface completely non-slip?
No. Slip risk depends on the surface, contamination, water, footwear, slope, maintenance and user behaviour. We assess and recommend a suitable treatment to improve slip resistance, but do not promise a risk-free surface in every condition.
Will anti-slip treatment change the appearance?
It can. The change depends on the treatment, surface and texture required. We explain the likely finish and use a trial area where appropriate before wider application.
Can anti-slip additive be added to every sealer?
No. The additive and sealer must be compatible with each other and with the prepared surface. Existing coatings, porosity and intended use affect the recommendation.
Do you provide P4 or P5 anti-slip treatment?
We can assess projects with a specified slip-resistance requirement. The correct system, installation and testing pathway must be defined for the site. A product or additive alone is not proof that the installed surface has achieved a rating.
How long before the area can be used?
Access depends on preparation, treatment, weather and curing requirements. We confirm the expected work stages and return-to-use instructions for the selected system.
What photographs should I send?
Send wide views, close-ups, the surface when dry and wet if safe to photograph, and any slope, drain, coating damage or shaded growth. Include the suburb and explain who uses the area.
Show us where the surface becomes slippery
Tell us the service area, surface type, suburb and whether the issue happens when wet, dry or both. Add photographs and any project specification or previous treatment details.